Mostrando entradas con la etiqueta Restaurar Configuración Fábrica. Mostrar todas las entradas
Mostrando entradas con la etiqueta Restaurar Configuración Fábrica. Mostrar todas las entradas

domingo, 26 de mayo de 2013

Cisco 801 / 881 reset to factory defaults and enable access from Cisco Configuration Professional

Spanish keywords: Resetear contraseña Cisco 801/881 Resetear Estado de Fábrica

To reset a Cisco 801 / 881 to factory defaults, you must:

1. unplug AC cord
2. press the reset button and hold it
3. plug de AC Cord, count less than 5 seconds (5,4,3,2 - plug)
4. wait until the router reset
5. test with a dhcp client on ethernet port 0

10.10.10.2 ip must be assigned to your desktop or laptop, the cisco router must have the 10.10.10.1 ip.  

You could access the router with http://10.10.10.1 or http://10.10.10.2 the one use user and password is cisco / cisco, but this console don't work fine

You must create another privilege 15 user.  So enter with putty to a secure shell (ssh). 

Remember that the cisco / cisco user and password combination is for a single login, later the cisco user expires so:

1. connect with putty and run this command to config the first settings of router
  • enable
  • configure terminal

2. create a local user
  • username admin privilege 15 secret cisco

  • with this you create a "admin" user with password "cisco" change as you wish

    3. enable http or https
    • ip http server  
    or
    • ip http secure-server
    4. Enable local user authentication
    • ip http authentication local
    Now you can use Cisco Configuration Professional to configure DHCP, NAT or Advanced Firewall Rules.

    Greetings

    BADBOY

    If you doubt use this MicroNugget Tutorial: http://www.youtube.com/watch?v=8TBuInpBu9M